Chainsaw sharpening info

CHAINSAW SHARPENING INFORMATION

The variety of chain sharpening wheels

For this type of wheels, we usually offer wheels for:
Steel chainsaw sharpening
Carbide tipped chainsaw sharpening
CBN wheels to grind chainsaw rakers
Harvester chrome coated chain sharpening wheels
Harvester non chrome chain sharpening wheels
Custom chainsaw sharpening wheels according to your requirements, geometry, grit sizes, etc.
Any custom wheel can be offered, no minimum order quantity is required. Contact us.

Pitch

There are two main pitches which are used for chain saws
1/4, .325, 3/8 Picco (wheel thickness 3,2mm)
3/8, .404 (wheel thickness 4,7mm)
Other thickness wheels can be found in our e-shop as well. If you do not find the wheel which you require in our e-shop, please contact us now, we will offer it.
When choosing the correct wheel, you should know the pitch of your chain.
Wheels to grind chain saw rakers are also available.

Which wheel to choose: diamond or CBN

If you are sharpening steel chain - CBN wheel is the correct choice.
If you are sharpening carbide tipped chain - you should choose diamond wheel. Please have in mind, you cannot use CBN wheel on carbide tipped chain. Never use diamond wheel on steel chain as well.

Wheel outside diameter diameter

Our wheels come in following diameters 5 3/4" (146 mm) , 4 1/8" (104 mm) and 8" (203 mm). You should check your grinder which diameter fits your machine. If you need other diameter please inquire and we will offer it for you.

Electroplated vs. Resin Bonded Diamond Wheels

Electroplated Diamond Wheels
Commonly used on automatic chainsaw sharpeners, such as MARKUSSON machines.
Maintain their original profile during use, as the diamond abrasive layer does not wear down in the same way as a resin bond wheel.
Once the diamond abrasive layer is worn out, the wheel has reached the end of its service life and must be replaced.

Resin Bonded Diamond Wheels
We recommend turning the wheel over every 20–30 grinding operations to maintain a properly radiused profile and ensure even wear.
When used and maintained correctly, resin bond wheels generally offer a longer service life.
Provide a finer, smoother surface finish.
Offer better heat dissipation, significantly reducing the risk of overheating or burning the chain.

Maintenance of resin bonded wheels

The wheel does not need to be cleaned in the normal conditions. But if the wheel gets clogged, there is free cleaning tool included with every wheel. To clean the wheel correctly turn on your grinder and let it reach full speed. Then turn it off and while the wheel is rotating, simply touch the cleaning stick to the surface of the diamond or CBN section of the wheel. The cleaning stick will make the wheel spin slower until it stops. You might need to repeat this operation 3-4 times, until you feel that wheel is clean and diamond or CBN grits are open and sharp. We also recommend to flip your wheel after sharpening every 20-30 chains.

If you need any help or recommendations please contact us at: info@baltic-abrasives.com